Application of the Small Punch Creep-Recovery Test (SPCRT) for the Estimation of Large-Amplitude Viscoelastic Properties of Polymers.

The Small Punch Creep-Recovery Test (SPCRT) is a novel miniature test used to estimate the viscoelastic properties of polymers and biomaterials. The current investigation related to the SPCRT is limited to Finite Element Method (FEM) simulations and experimental tests on PVC. The aim of this investigation was focused on: (i) extending the experimental tests to other polymers with dissimilar viscoelastic properties; (ii) deepening the influence of non-linear viscoelastic properties in the estimation capabilities of the SPCRT; and (iii) developing a numerical methodology to estimate and take into account the viscoelastic recovery produced during the unloading step of compressive creep-recovery tests (CCRT) and SPCRTs. The experimental tests (CCRTs and SPCRTs) were done on polyethylene PE 500, polyoxymethylene POM C, nylon PA 6, and polytetrafluoroethylene (PTFE), with a range of creep loads, in the case of CCRTs, in the whole elastic regime and the surroundings of the yield strength of each material. The experimental results confirmed that the SPCRT was an accurate and reliable testing method for linear viscoelastic polymers. For a non-linear viscoelastic behavior, SPCRT estimated the viscoelastic properties obtained from CCRTs for creep loads near the yield strength of the polymer, which corresponded with large-amplitude viscoelastic properties in dynamic creep testing. In order to consider the viscoelastic recovery generated in the unloading step of CCRTs and SPCRTs, a Maxwell-Wiechert model with two branches was used, simulating the different steps of the experimental tests, and solving numerically the differential equation of the Maxwell-Wiechert model with the Runge-Kutta-Fehlberg (RKF) numerical method. The coefficients of the elements of the Maxwell-Wiechert model were estimated approaching the straining curve of the recovery step of the simulation with the same curve registered on each experimental test. Experimental CCRTs with different unloading times demonstrated that the use of this procedure derived in no influence of the unloading step time in the viscoelastic properties estimation.

Noise Disturbance and Well-Being in the North of Spain.

Environmental noise is considered one of the main risks for physical and mental health and well-being, with a significant associated burden of disease in Europe. This work aims to explore the main sources of noise exposure at home and its effect on well-being in northern Spain. A transversal opinion study has been performed through a closed questionnaire. The questionnaire included three different parts: sociodemographic data, noise disturbance, and the 5-item World Health Organization Well-Being Index (WHO-5). A Binary Logistics Regression model was performed to analyze the relationship between noise exposure and well-being. Overall, 16.6% of the participants consider that the noise isolation of their homes is bad or very bad. The noise generated by the neighbors (air and impact noise) is considered the most disturbing indoor noise source, while street works are the most disturbing outdoor noise source in urban areas and road traffic is the most disturbing in rural areas. People who indicate that noise interferes with their life at home have a worse score on the WHO-5 (decreased perception of well-being). The exposure to outdoor noise (specifically the noise coming from the street and trains), internal impact noise produced by neighbors, and in general, the noise that wakes you up, is related to receiving a worse score in the WHO-5 (p < 0.05). Administrative bodies must ensure that laws regulating at-home noise levels, which are continually being updated with stricter restrictions, are enforced.

Cold Expansion Process with Multiple Balls-Numerical Simulation and Comparison with Single Ball and Tapered Mandrels.

Cold expansion technology is an extended method used in aeronautics to increase fatigue life of holes and hence extending inspection intervals. During the cold expansion process, a mechanical mandrel is forced to pass along the hole generating compressive residual hoop stresses. The most widely accepted geometry for this mandrel is the tapered one and simpler options like balls have generally been rejected based on the non-conforming residual hoop stresses derived from their use. In this investigation a novelty process using multiple balls with incremental interference, instead of a single one, was simulated. Experimental tests were performed to validate the finite element method (FEM) models and residual hoop stresses from multiple balls simulation were compared with one ball and tapered mandrel simulations. Results showed that the use of three incremental balls significantly reduced the magnitude of non-conforming residual hoop stresses and the extension of these detrimental zone.